Shenzhen Shunchang Motor Co., LTD.

Products

Home > Products > Gear Motor

Gear Motor

China Gear Motor Suppliers

Dc Gear Motor, namely Gear Reduction Motor, is based on ordinary Dc Motor, coupled with gear reduction gearbox.

The gear reducer is used to provide low speed and large torque.

At the same time, the gearbox with different deceleration ratio can provide different speed and torque.

Generally different industries, using different power DC Motor, generally adopt custom parameter design pattern.


What are the four ratings of the Dc Gear Motor? The DC Gear Motor is often seen in our industrial production. Here Shunchang Motor gives you the knowledge of its four ratings. To talk about

1. Rated Current: The rated current is the maximum current allowed to flow through the armature winding of the DC deceleration motor in accordance with the specified operating mode, in A.

2. Rated Voltage: The rated voltage is the maximum additional voltage that the armature winding of the motor can work safely, unit V. It

3. Rated Speed: Rated speed refers to the rotational speed of the Gear Reducer Motor  in the rated voltage, rated current and output rated power under the circumstances of operation, the unit is r/min. Such

4, rated power: rated power refers to the motor in accordance with the specified mode of operation can provide output power. For motor, rated power is the output of mechanical power on the shaft.

Gear Motor

precision instruments and meters,automobile industry, medical equipment, consumer electronics, household appliances, electric glass doors and Windows,etc., wide application range

gear motor

Features: gear motor drive precision, small volume, large torque, low noise, durability, low energy consumption, customized power design,easy installation, easy maintenance;Simplify design and save space.


Method of use: the best stable in horizontal plane, installed on the dc gear motor output shaft parts, cannot use a hammer to knock,knock prone to press into the dc gear motor drive, may cause damage to internal components, and cannot be used in the case of blocked.


dc gear motor


Operating temperature range:

Geared motors should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at  ordinary room temperature catalog specifications re based on use at ordinary room temperature  (approximately20~25℃.

If a geared motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

Geared motors should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of geared motors is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.

●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.

   dc gear motor    dc gear motor


when it come to volume production,we're a major player as well .each month,we rurn out  600000 units,all of which are compliant  with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department  to service to you Looking forward to your inquiry. Welcome to our factory.

gear motor


 










Home > Products > Gear Motor

Send Inquiry

Mr huang

Mr. Mr huang

Tel:86-0755-27903231

Fax:86-0755-27794741

Mobile Phone:+8618938094656Contact me with Whatsapp

Email:wei@sc-motor.cn

Address: 504 East of Building C6,Hezhou Hengfeng Industricl city,Xixiang,Bao'an,Shenzhen City, Shenzhen, Guangdong

Mobile Site

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send